How to load smart label printer 620
SLP620-IN (SII - Seiko Instruments Inc)
https://www.seikoprinter.com/
Unpacking the SLP
Carefully remove the printer and its components from the box. It's a good idea to save the box and packing materials in case you need to store or ship the printer. Accessories vary depending on the package.
Installing the Software from CD or Manually.
Insert the Smart Label CD. The installation wizard starts automatically on most systems.
Please note: If your printer is not recognized or all label templates do not appear, you will need to set-up your printer within the SLP printer software. Please see "Setting up the Printer".
Connecting the SLP to a Power Outlet
1． Connect the supplied AC adapter to the back of the SLP and to a power outlet.
2． The printer powers on automatically when connected to AC power. The Status Light will flash if no labels are loaded in the printer.
https://www.seikoprinter.com/
Connecting the SLP to Your Computer
Use the USB or serial cable provided with the SLP 620, 650, or 650SE to connect the SLP to your
computer.
CAUTION: Connecting or disconnecting the interface cable while the printer is turned on may
damage the printer.
Follow these steps:
1． Make sure that the SLP is turned off. If the Status Light is on, hold the Power Button until the SLP is turned off.
2． Connect the printer to your PC or Mac.
When using the USB cable:
Insert the USB cable into the USB port on your PC or Mac.
If all USB ports are in use, you may need to purchase a USB hub.
Connect the other end of the cable into the appropriate port on the back of the SLP.
When using the serial cable:
Insert the serial cable into the serial port on your PC or Mac.
Connect the other end of the cable into the appropriate port on the back of the SLP.
No comments:
Post a Comment