how to install smart label printer 650
 |
| SLP650-IN (BIS Approve - SII - Seiko Intrument inc GmbH) |
Installing the Software
Installing the Smart Label Program for MacOS X
1. Insert the Smart Label CD. If the installer does not appear automatically, double-click the CD on your desktop or in the left pane of a new Finder window.
2. Double-click the file SIISmartLabelPrinter.mpkg. The installer will appear. Follow the on-screen instructions.
3. Mac OS X 10.5 or later will automatically set up your printer, once the SLP is connected.
Installing the Smart Label Program for Windows
1． Insert the Smart Label CD. The installation wizard starts automatically on most systems. If the introductory screen doesn't appear after a few seconds, do the following:
2． Click the Windows Start button then point to Settings and choose Control Panel.
3． Double-click Add/Remove Programs then click the Install button. Follow the install wizard to assist with installation.
Please note: If your printer is not recognized or all label templates do not appear, you will need to set-up your printer within the SLP printer software. Please see "Setting up the Printer".
Connecting the SLP to Your Computer
Use the USB or serial cable provided with the SLP 620, 650, or 650SE to connect the SLP to your
computer.
CAUTION: Connecting or disconnecting the interface cable while the printer is turned on may
damage the printer.
Follow these steps:
1． Make sure that the SLP is turned off. If the Status Light is on, hold the Power Button until the SLP is
turned off.
2． Connect the printer to your PC or Mac.
When using the USB cable:
Insert the USB cable into the USB port on your PC or Mac.
If all USB ports are in use, you may need to purchase a USB hub.
Connect the other end of the cable into the appropriate port on the back of the SLP.
When using the serial cable:
Insert the serial cable into the serial port on your PC or Mac.
Connect the other end of the cable into the appropriate port on the back of the SLP
No comments:
Post a Comment